Blog
The Crew Technical Services Blog
Welcome to the Crew Technical Services Services blog, your trusted resource for electrical safety and advice in Calgary.
Planning A Backup Generator For An Okotoks Home
Choosing a backup generator Okotoks households can rely on starts with the circuits you cannot lose, from the furnace to a well pump.
Chestermere Cottage Electrical Upgrade For Year Round Living
A Chestermere cottage electrical upgrade for year round living covers service size, winter loads, older wiring, and exterior circuits. See what changes.
What A Load Calculation Is For A Calgary Home
A load calculation shows what a Calgary home’s panel can carry before a hot tub, EV charger, or generator goes in. See how it works.
Standby Vs Portable Generator For Calgary Winters
The standby vs portable generator Calgary decision turns on outage length, how the unit connects to the house, and what winter does to fuel and starts.
Planning The Electrical For A Backyard Suite In Calgary
Electrical for a backyard suite in Calgary runs on its own permit, load calculation, and trench inspection. Here is how the service connection fits in.
Do I Need A Permit For A Hot Tub In Calgary?
Do you need a permit for a hot tub in Calgary? It depends on the wiring. See what triggers one, who can pull it, and how inspections work before delivery.
Outdoor Lighting for Cochrane Acreages
Outdoor lighting for a Cochrane acreage covers a lot of ground, from driveway to outbuildings. Here is how to plan a system that actually fits the property.
Do You Need a Panel Upgrade for a Basement Development?
Planning a basement development in Calgary? Here is how to tell if your panel can handle it and when an upgrade is the smarter move before the drywall goes up.
Wiring a Block Heater Plug the Right Way in Calgary
A block heater plug needs a safe outdoor outlet with the right protection for Calgary winters. Here is how it should be wired and why GFCI matters.
Flood Damage and Your Wiring in Elbow Park
Elbow Park sits close to the river, and flood water reaches the wiring in ways you cannot see. Here is what to do before flipping a breaker back on.